Wolf-tooth Wolf Tooth Roadlink Derailleur Hanger

Wolf Tooth Roadlink Derailleur Hanger

Created by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.

If you’re looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you.

The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth’s 40-tooth GC cassette extenders and Drop-Stop chainrings.

The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.

Features:

• Material: 6061 Aluminium
• Included: Stainless Steel bolt
• Torque: 8-10Nm
• Speed: 10 and 11-Speed
• Use: Road, Gravel, cyclocross (CX)
• Direct Mount-native frames are not supported
• Triple chainrings are not supported
• Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded
• Made in the USA
• Manufacturer’s Part Number: WTRLINK
• Weight: 17g

10-Speed Cassette Compatibility:

• 11-32T: Not Required (GS medium cage rear derailleur works)
• 11-34T: Single (for double chainring be sure to not exceed the derailleur’s capacity)
• 11-36T: Single (for double chainring be sure to not exceed the derailleur’s capacity)
• 11-40T: Single (for double chainrings sure to not exceed the derailleur’s capacity)
• 11-42T: Not supported

11-Speed Cassette Compatibility:

• 11-32T: Not Required (GS medium cage rear derailleur works)
• 11-34T: Single (for double chainring be sure to not exceed the derailleur’s capacity)
• 11-36T: Single (for double chainring be sure to not exceed the derailleur’s capacity)
• 11-40T: Single (for double chainring be sure to not exceed the derailleur’s capacity)
• 11-42T: Not supported
• 10-42T: Not supported

Please Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use.

Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary.

Buy Wolf Tooth Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.